HOME
Manual

Ethernet over Coax Extender Kit
EOC-100K
PIC: N-3

 

Description:

This kit has the advantage of extending 200~300m / 650~900ft by a one-side powered Ethernet over coax pair units. The Powered Sourcing Equipment (PSE), EoC-100-HOST, is powered by 24V DC, and transmit power and Ethernet data signal through a single coaxial cable to the Powered Device (PD), EoC-100-D, which is connected to an IP camera or a storage device.

 

Features:

  • Extend Ethernet signal over coax
  • 10/100Mbps / Full duplexer
  • Coax cable: RG59 video-grade coaxial cable or better
  • Extend the transmission distance of Ethernet signal from 100m / 328ft to 200~300m / 650~900ft
  • Allow you to save money by using existing coax cable
  • BNC connector / RJ45
  • 24V DC Powered Sourcing Equipment - Host Unit

 

 
Application Diagram:
 

Specification: 
Kit Model
EoC-100K
Model
EoC-100-HOST
EoC-100-D
Unit Type
Host Unit – PSE Side
Device Unit – PD Side
Interface Data Port

1x RJ-45 female connector (IN)
1x RJ-45 female connector (OUT)
Power Port
1x DC Jack (IN)
---
Data + Power Port
1x BNC Connector (OUT)
1x BNC Connector (IN)
Cable
RG59, RG6, or RG11 video-grade coaxial cable
(used for cable CATV or CCTV)
Electrical Standard
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
Speed
10/100Mbps for full duplexer
Transmission Distance
0~300m / 0~900ft for coaxial cable
100m / 328ft UTP cable + 300m / 900ft coaxial cable + 100m / 328ft UTP cable available

Power Input Operating Voltage
24V DC @ Power port
No Power Required
Power Consumption
1Amp / <=2.4 W
Environment Operating Temperature
-10°C ~ +60°C / 14°F ~ 140°F<
Physical Properties Enclosure Material
Aluminum alloy<
Mounting
Wall mounting available
Dimension      WxHxD
112.2 x 31.5 x 71.3 mm / 4.4 x 1.2 x 2.8 inches
*Specifications are subject to change without notice








N-3