Ethernet & Power Extender Over Coaxial Cable Kit
Model: EPOC-100K 
PIC: N-6



This Ethernet & power extender is consisted of EPOC-100-SV (host/server side) and EPOC-100-IPC (camera side) which can use in a kit or one-to-many. It uses coaxial cable or another type of cable to transfer Ethernet signal and power, and power for cameras and other devices. This product is suitable for long distance transmission of Ethernet signal and power. It can be used in security network video surveillance.

  • Use coaxial cable to transmit Ethernet signal and power
  • Maximum distance up to 2000m / 6500ft
  • Network delay less than 1ms
  • Optional transmission medium, coaxial cable, power line, telephone cable or UTP cable
  • Meet single mode, link mode and star mode network at the same time
  • Loop circuit mode ; if there is one breakdown in the circuit, the system can still work normally
  • Meet Standard: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX
  • Appearance and structure Solid and delicate, meet MIT rack installation standard
  • Protection: Excellent circuit isolation protection, effectively improve product's lightning protection, ESD and anti-interference ability
  • 48V~57V DC (EPOC-100-SV)
Application Diagram:

Application 1: Point-to-Point*

N-7 EPOC-POE-100K Application

Application 2: Point-to-Serial Chain*

* It is recommended that no more than two of EPOC-100-IPC are to be used in a serial chain.

Application 3: Point-to-Multi Point*

Application 4: (Max. with EOC-100-IPC)*
N-5 & N-6 EOC-100K & EOCP-100K Application

* Refer to User manual for distance and upload/download speeds.


Kit Model
Application Location
Host/Server Side
Camera Side
Power Supply
Power Adapter

Powered by
through coaxial cable

Voltage Range
48V~57V DC
Power Consumption
Whole machine <10W, other consumption for EPOC power output
Power Voltage 48V~57V
Ethernet Port

EPOC Port: Use coaxial cable to transmit Ethernet signal
and power
Ethernet Port: 10/100Mbps

Transmission Distance

Coaxial Cable: 2000m / 6500ft (max),
(transmission rate decreases with increasing
of transmission distance)
Cat5\5e\6: 100m / 300ft

LED Status Indicator

Power: 1 (Red)
EPOC Ethernet: 1 (Green)
RJ415 Ethernet: 1 (Green), 1 (Yellow), indicate Link/Active

ESD Protection

1a Contact Discharge 3 Level
1b Air Discharge 3 Level­­­
Per: IEC61000-4-2

MTBF Stability > 30,000h
Working Temperature 32°F ~ 131°F / 0°C ~ 55°C
Storage Temperature -40°F ~ 158°F / -40°C ~ 70°C
Humidity (non-condensing) 0~95%
Dimensions (L x W x H) 82 x 100 x 25 mm / 3.23 x 3.94 x 0.98 inches
Net Weight 180g / 6.35 oz 180g / 6.35 oz

*Specifications are subject to change without notice