PoE Over Coaxial Cable Kit
Model: EPOC-POE-100K 
PIC: N-7



This PoE extender consists of one EPOC-POE-100-SV Unit (host/server side) and one EPOC-POE-100-IPC Unit (camera side). It can transfer Ethernet signal of IPC-Unit to carrier signal though coaxial cable or network cable and extend to SV-Unit, then transfer carrier signal to Ethernet signal and transmit power synchronously. SV-Unit could use 48~57V DC power supply or PoE power supply, which fully meets the needs of long distance Ethernet signal transmission and power supply. It is widely used in coaxial cable and network cable mixed wiring security surveillance and network rebuilding projects.

  • Uses coaxial cable or network cables to transmit Ethernet and power signals
  • Max. distance up to 500m / 1600ft via coaxial cable; 400m / 1300ft via network cable
  • Adopt advanced transmission and power supply technology
  • Ethernet delay less than 1ms; meets point-to-point application
  • Standards: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3af/at
  • Protections: Excellent circuit isolation protection, superior product anti-thunder, anti-static and anti-interference capability
  • Appearance: Meets MIT rack installation standard
  • Plug-and-play, no setting required
  • 48~57V DC power supply (Not included) (EPOC-POE-100-SV)
Application Diagram:

Application 1:*

N-7 EPOC-POE-100K Application

* Refer to User manual for distance and upload/download speeds.


Kit Model
Application Location
Host/Server Side
Camera Side
Power Supply
From PoE Switch or
Power Supply

Powered by
through coaxial cable

Voltage Range
48V~57V DC
Power Consumption
< 2W
Power Voltage 48V~57V
Ethernet Port

EPOC Port 0~100Mbps ; Ethernet Port 10/100Mbps

Transmission Distance

Coaxial Cable: 500m / 1600ft (max.)
Network Cable: 400m / 1300ft (max.)
Transmission bandwidth changes with transmission distance** (refer to Table 1 and Picture 1)

Transmission Medium

75-5 Above Coaxial Cable and CAT5e/6

PoE Agreement

Support IEEE802.3af, IEEE802.3at

PoE Power Supply Support End-span and Mid-span
Ethernet Standard IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX
Ethernet Delay < 1ms
LED Status Indicator

PoE IN/OUT Port: One indicates PoE switch or DC power status (RJ45 yellow), one indicates Ethernet signal transmission (RJ45 green);
EPOC Port: Indicates signal transmission (RJ45 yellow/green)

ESD Protection

1a Contact Discharge 3 Level
1b Air Discharge 3 Level­­­
Per: IEC61000-4-2

Communicating Port
Anti-thunder Protection

Per: IEC61000-4-5 level 3
MTBF Stability > 30,000h
Working Temperature 32°F ~ 131°F / 0°C ~ 55°C
Storage Temperature -40°F ~ 185°F / -40°C ~ 85°C
Humidity (non-condensing) 0~95%
Dimensions (L x W x H) 82 x 63.2 x 25 mm / 3.23 x 2.49 x 0.98 inches
Net Weight 153g / 5.4oz 154g / 5.43oz

*Specifications are subject to change without notice