IP / PoE,  Analog,  and  PTZ  Camera Service Tester
PIC: T-83



The IP Camera Tester combines an analog video tester, PTZ camera controller, and IP digital video tester into a single hand-held device, utilizing an ultra-bright, high-resolution 3.5 Inch Color LCD Screen, which makes all camera adjustments a snap.

IP Camera Tester benefits users by providing various network protocol compatibilities. With customized built-in codec, IP Camera Tester is capable of decoding video streaming simultaneously and allowing users to view and to adjust focus on the monitor. The Tester also operates on both NTSC and PAL TV system by standard BNC video input. Moreover, it has a phone-jack that allows users to test for audio if available. Furthermore, IP Camera Tester runs by a rechargeable battery that provides the Tester with up to three hours of operating time.

Blending functionality and compatibility, IP Camera Tester is a versatile video tester for both analog and IP applications.



  • Built-in 3.5” LCD monitor with QVGA resolution
  • 10/ 100Mbps Ethernet with RJ-45 connector
  • PTZ control/ command parse via Ethernet and RS-485 interface
  • Built-in touch panel/ keypad.
  • High capacity Lithium battery
  • UTP cable test
  • H.264 and MJPEG video compression
  • Passive, no power required
  • NTSC/PAL Video in/ Audio in/ Speaker out
  • PoE/ PoE+ function support
  • PoE voltage, current, and power consumption measurement
  • Local recording and playback



Color LCD Field Display 
3.5"/ 320x240
Video Input 
BNC x 1
PTZ Control 
RS-485 Ports 
R+, R-, T+, TPTZ
TPTZ Camera Setting 
Pan, Tilt, Zoom, Manual Focus, Auto Focus
Support Protocols 
DSCP, Pelco D, Pelco P, AD422, Panasonic_C, Panasonic_N, JVC, Fastrax 2, Dynacolor, Molynx, Optix, Sensormatic
10/100 Mbps, 48VDC In, Power Bank In
LAN Out 
10/100 Mbps, 802.3at standard
IP Camera Setting 
IP Address setting, Image Setting
Support Brands 
DynaColor, ACTi, A-MTK, Axis, Arecont Vision, Hunt, IQinVision, Luxon, Planet, Pixord, Sanyo, Sony, Vivotek, ONVIF, ZAVIO, XVISION, eVidence, Optix, SPECO, HikVision
CAT-5 Port
450 g (Battery included)
Battery Type
2 x 3.7 V Li-Ion, 2000mAh
Charge Cycles
> 300 @ 80% capacity
Charging Time
3.5 Hrs
Operating Time
3 Hrs
IP Setting
DHCP, Static IP
Dimension (LxWxH)
170x99x38 mm
Electronic Input Voltage
DC12V, 5A
Video Signal Format
Video Level
1Vpp, 140IRE
PTZ Control Data Communication
IP Camera Connection
CAT-5 Cable Test Detects
Straight/Cross Cables, Open, Short, Miswired
USB Type
USB 2.0

*Specifications are subject to change without notice